Traktorino

A MIDI control surface for compatible DJ software, not an audio interface or standalone DJ player.

Documented controller with legacy setup · Sources reviewed 11 September 2026

CAIBI assessment

A documented custom DJ-control route with PCB and enclosure files, but the legacy USB firmware and current host mappings need proving before a complete build.

Open original source ↗

Cost and commitment

No purchasable complete kit or verified regional BOM total. Cost must include PCB/enclosure fabrication and any paid host software.

Lead and build time

No verified current build or setup time.

Parts and fabrication

Arduino Uno with ATmega16U2 USB interface, not an arbitrary compatible clone
Revision-matched PCB and the controls listed in the repository
Plywood enclosure from the supplied fabrication files
USB data cable and compatible DJ software with a verified mapping

The repository includes PCB and plywood enclosure files. Inspect exact dimensions, material thickness, control cutouts and quantities before ordering fabrication; no alternate-material cutting list has been validated.

The linked source BOM and files control exact quantities, dimensions and revision. This summary is not a replacement fabrication file.

Assembly and test route

Follow the creator’s detailed instructions at each stage. The sequence below identifies the decisions and checks that connect them.

Read the repository hardware requirements and choose the exact Uno USB interface. Confirm a usable mapping for your DJ software.
Inspect PCB and enclosure files against the control BOM. The source kit is unavailable, so establish a component basket first.
Build and inspect the circuit using source instructions; test connections before closing the enclosure.
Follow both main-controller and USB-interface firmware steps. Treat them as distinct uploads and retain a recovery route.
Test every control and its host action, then record missing mappings, latency and disconnect behaviour.

Where AI helps

AI can help explain the two firmware stages and compare host mappings. USB recovery, wiring and actual software compatibility require direct checks.

UK and US purchasing

No current regional basket has been verified for this exact build. Use the source parts list below to establish UK and US variants and delivery costs before buying. We have not substituted generic shopping links for compatible parts.

Benchmark this project

Use the Traktorino prompt. Compare what different models deliver, then add what happened when you tried it.

Try this benchmark

View the project prompt

CAIBI adaptation · Prompt 1.0 · Project source

Prompt for Traktorino

CAIBI project benchmark: Traktorino
Prompt version 1.0

Help me build Traktorino using the existing creator project at https://github.com/silveirago/traktorino. This is a CAIBI benchmark adaptation of the project build brief, not a claim about how the creator used AI.

Project context:
- A MIDI control surface for compatible DJ software, not an audio interface or standalone DJ player.
- Build context: Arduino Uno with ATmega16U2 USB interface, not an arbitrary compatible clone; Revision-matched PCB and the controls listed in the repository; Plywood enclosure from the supplied fabrication files; USB data cable and compatible DJ software with a verified mapping.
- Fabrication scope: The repository includes PCB and plywood enclosure files. Inspect exact dimensions, material thickness, control cutouts and quantities before ordering fabrication; no alternate-material cutting list has been validated.
- AI role: AI can help explain the two firmware stages and compare host mappings. USB recovery, wiring and actual software compatibility require direct checks.
- Known limitation: Legacy instructions include a placeholder clone URL and unverified broad software-compatibility claims. Do not assume current Serato or Traktor compatibility.

Read the source first. Use its published design, files, dimensions and parts as the baseline; do not redesign it unless a missing detail requires a clearly labelled proposal. If you cannot access a source or verify a revision, say so.

Provide one practical build package:
1. Design and files: explain the source design, link the original editable files, and identify missing files or modifications.
2. Parts and fabrication: give quantities, exact variants and compatibility, plus a cutting or printing list where applicable. Preserve source dimensions; flag anything unconfirmed.
3. UK and US purchasing: direct product links, checked dates, stock, pack sizes, taxes, delivery and regional costs. Mark unverifiable details as unknown; do not invent links, prices or availability.
4. Assembly: an ordered guide covering fabrication, fitting, wiring or software as applicable, setup, checks and troubleshooting.
5. Cost and time: separate parts, fabrication, delivery, hands-on time and machine time, with assumptions and exclusions.
6. Function and ease: a test plan for the project's stated purpose, likely difficulties, required skills and any corrections or limitations.

Keep source facts, your proposals and items needing physical verification distinct. An estimate is not a measured build result. Do not claim to have built or tested hardware. Include failed attempts and omissions. If a section does not apply, say why.

Use the source as accessed during this run and record its revision or access date. The prompt is fixed; the linked source can change.

Open and copy prompt →

Benchmark results 0

No reviewed results yet for Traktorino. Add the first result →

Source evidence and limits

SOURCE: linked creator documentation and product descriptions.

CAIBI: the desk assessment above, based on those documents. Legacy instructions include a placeholder clone URL and unverified broad software-compatibility claims. Do not assume current Serato or Traktor compatibility.

BUILDERS: no first-hand build result is claimed by this assessment.

Contribute source updates or evidence →